The DPA d:facto series brings true studio sound to the live stage and broadcasting studio. The SL1 wireless capsule package allows for seamless integration to Shure, Sony, Lectrosonics and Line6 wireless systems. This gives you flexible, simple and affordable possibilities. 

 

The DPA d:facto capsule & SL1 adapter are available for hire now.

DPA d:facto SL1 Shure Capsule

$75.00Price
    • Directional pattern: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency response: 20 Hz - 20 kHz
    • Effective frequency range ±2 dB, at 12 cm: 40 Hz - 16 kHz with 3 dB soft boost at 12 kHz
    • Sensitivity, nominal, ±2 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
    • Equivalent noise level, A-weighted:  Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
    • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
    • Dynamic range: Typ. 120 dB
    • Max. SPL, THD 10%: 160 dB SPL peak
    • Rated output impedance: 100 Ω
    • Minimum load impedance: 1 kΩ
    • Cable drive capability: 100 m (328 ft)
    • Output balance principle: Impedance balancing with Active Drive
    • Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
    • Power supply (for full performance): P48 (Phantom Power)
    • Current consumption: Max 2.0 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • Color: Matte black
    • Maximum output voltage, RMS: 8V
    • Polarity: +V at pin 2 for positive sound pressure
    • Temperature range: -40°C to 45°C
    • Relative humidity (RH): Up to 90%