The DPA d:facto series brings true studio sound to the live stage and broadcasting studio. The SE2-ew wireless capsule package allows for seamless integration with Sennheiser 2000/9000/6000/D1/Evolution wireless systems.  This gives you flexible, simple and affordable possibilities. 

 

The DPA d:facto capsule & Se2-ew Sennheiser wireless adapter are available for hire now.

DPA d:facto SE2-ew Sennheiser Capsule

$75.00Price
    • Directional pattern: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency response: 20 Hz - 20 kHz
    • Effective frequency range ±2 dB, at 12 cm: 40 Hz - 16 kHz with 3 dB soft boost at 12 kHz
    • Sensitivity, nominal, ±2 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
    • Equivalent noise level, A-weighted:  Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
    • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
    • Dynamic range: Typ. 120 dB
    • Max. SPL, THD 10%: 160 dB SPL peak
    • Rated output impedance: 100 Ω
    • Minimum load impedance: 1 kΩ
    • Cable drive capability: 100 m (328 ft)
    • Output balance principle: Impedance balancing with Active Drive
    • Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
    • Power supply (for full performance): P48 (Phantom Power)
    • Current consumption: Max 2.0 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • Color: Matte black
    • Maximum output voltage, RMS: 8V
    • Polarity: +V at pin 2 for positive sound pressure
    • Temperature range: -40°C to 45°C
    • Relative humidity (RH): Up to 90%