POWER SUPPLIES
AC power input Neutrik PowerCON TRUE1 (IP65)
115/230V 50/60 Hz
Automatic power supply switching

INPUT POWER
700VA at 230V 50Hz

LIGHT SOURCE
440W discharge lamp
– Type: Osram Sirius HRI® 440W X
– Life: 1,500hrs
– Luminous flux: 22,000 lm
– Cap by faston TM 250 (6.35 mm)

OPTICS
160mm diam. front lens
Electronic focusing for a perfectly sharp light beam along its entire length
Zoom ranging from 4° to 31° for fixed gobos sharp focusing
Zoom range from 6.7° to 50° for rotating gobos sharp focusing
BEAM mode with 2.5° aperture and “pipe” effect

COLOUR SYSTEM
CMY colour system based on 3 gradually fading colour wheels
15 colour filters on three wheels
2 CTO filters (3,200K and 2,500K) + 1 CTB filter

EFFECTS SECTION
2 gobo wheels:
– wheel with 6 HQ dichroic, indexable and interchangeable rotating gobos (Ø 25.9mm).
– interchangeable and variable rotating wheel with 18+1 fixed metal gobos (including 6 beam reducers).
Selectable Gobo-Shake function
Advanced Visual Effect Disc (Animation disc)
2 indexable and interchangeable rotating prisms (8-facet and linear prism)
Frost unit to soften the beam edge
High precision 0-100% dimmer
Mechanical shutter and adjustable speed strobe effect

CONTROL AND PROGRAMMING
30/34 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Art-Net / RDM
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Focus Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 5 pole XLR input and output
Software upload through DMX input

BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY
Angle:
– PAN = 540° – TILT = 244°
Resolution:
– PAN = 2.11° – PAN FINE = 0.008°
– TILT = 0.960° – TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
“ENERGY SAVING” function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
“AUTOTEST” function from menù
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture

WORKING POSITION
Working in any position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

WEIGHT
32 kg